chirpy Posted May 31, 2009 Share Posted May 31, 2009 hi,I have a Phillips cd135 phone which sits on a base and can be used at up to 100metres away.Today,the base ststion is flashing a light which indicates a missed call.However thr phone reads "searcing" and I cannot erase this nor get a call made !!!!!I tried unplugging overnight and recharging but still the same --any ideas please.[8-)] Link to comment Share on other sites More sharing options...
Clair Posted May 31, 2009 Share Posted May 31, 2009 http://www.p4c.philips.com....What can I do when SEARCHING appears in the display of my phone? Link to comment Share on other sites More sharing options...
chirpy Posted May 31, 2009 Author Share Posted May 31, 2009 I tried these and still no change??????????????????[8-)] Link to comment Share on other sites More sharing options...
Dave&Olive Posted May 31, 2009 Share Posted May 31, 2009 hi ok Have you had a storm ??? we have lost 2 base stations and a modem fried in the pc ..... fit a surge protector.. dave Link to comment Share on other sites More sharing options...
Ecossais Posted May 31, 2009 Share Posted May 31, 2009 Assuming your phone is a digital (DECT) cordless phone, if the screen shows “searching” it usually means the handset has lost “contact” with the base unit, either because the maximum connection range has been exceeded or the handset has become “unregistered” from the base unit. It can also happen if the base unit is unplugged from the mains or the batteries in the handset have become totally discharged and not used for a while.Have a look in the instruction manual – there should be a section covering adding or removing (or registering and de-registering) handsets from the base unit. I’d suggest you first follow the instructions for deregistering your handset and then re-register it with the base unit. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now