HoneySuckleDreams Posted January 29, 2007 Share Posted January 29, 2007 Just a quicky....I want to put our boiler (Biasi - fuel oil fired) on to a separate disjoncteur, so I can meddle with it in isolation without turning all the rest of the electrics in the house off. At the moment it's plugged into a normal plug on the wall. Can anyone tell me if it should be a 10A/16A/20A or lower? Or how to calculate it? Link to comment Share on other sites More sharing options...
plumber Posted January 29, 2007 Share Posted January 29, 2007 A 5 amp fused spur would suffice. [8-|] Link to comment Share on other sites More sharing options...
shimble Posted January 29, 2007 Share Posted January 29, 2007 your boiler should be connected to a 16Adisjoncter divisionaire with 2.5mm cable and nothing else on the line the disjoncter is then connected to a type ACinterupter differntial from the book "installation electrique" by thierry gallauziax an indispensable if not confusing book 5 amp fuse mes couilles Link to comment Share on other sites More sharing options...
Nick Trollope Posted January 29, 2007 Share Posted January 29, 2007 [quote user="plumber"]A 5 amp fused spur would suffice. [8-|][/quote]There are no fused spurs in France. Fuses can only be used in "renovations", but noone in their right mind would use one, with DD's now costing less than 10€. Link to comment Share on other sites More sharing options...
Anton Redman Posted January 29, 2007 Share Posted January 29, 2007 It depends what the manufacturers rating for peak power coinsumption of the pump and control circuits of the cebtral heating system is. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now