Pat76 Posted June 7, 2011 Share Posted June 7, 2011 Hi I have searched but have been unable to find the information I need, so sorry if this has been covered before.We are planning to start our new plumbing this summer, and were hoping to source what we need in England. Currently our water supply arrives from the water meter in a black plastic pipe, about 20 mm in diametre. We are planning to put in John Guest plastic speedfit fit pipework, which would have to be connected to the black plastic pipe. My question is, has anyone done this, and are the connectors readily available, either in England or in France? We would need to connect the black plastic pipe to 22 mm John Guest speedfit pipe.ThanksPat Link to comment Share on other sites More sharing options...
Théière Posted June 7, 2011 Share Posted June 7, 2011 There are heavy brass fittings for the black pipe which terminate in either male or female BSP threads so it should not be a problem with your JG fittings to match up using their brass threaded to plastic fittings maybe even a blue PE fitting.http://www.ribaproductselector.com/Docs/7/12647/external/COL1012647.pdf?ac= Link to comment Share on other sites More sharing options...
Pat76 Posted June 7, 2011 Author Share Posted June 7, 2011 Hi Theiere (sorry, can't do accents!)Thanks for the reply, and the link. Pat Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now