Chancer Posted August 2, 2010 Share Posted August 2, 2010 There sure aint nowt else to do here in July or August [;-)] Link to comment Share on other sites More sharing options...
pachapapa Posted August 2, 2010 Share Posted August 2, 2010 And on the Haynes Manual difficulty of repair rating....barbecue & gas bottle gets half a spanner. Link to comment Share on other sites More sharing options...
Chancer Posted August 2, 2010 Share Posted August 2, 2010 About 10 years ago whilst camping in the Pas De Calais we heard a huge bang one evening, just around the corner was the remains of a gas barbecue, IIRC it was the griddle type that sits on the cylinder which had ripped apart at all the welded seams.I have no idea how it occured and until that point thought that combustible gas under pressure would only burn outside of the cylinder, apart from the cylinder rupuring in say a house or a warehouse fire.Luckily no-one was injured but it looked just like photos I have seen of petrol storage containers that had gone up. Link to comment Share on other sites More sharing options...
pachapapa Posted August 2, 2010 Share Posted August 2, 2010 [quote user="Chancer"]About 10 years ago whilst camping in the Pas De Calais we heard a huge bang one evening, just around the corner was the remains of a gas barbecue, IIRC it was the griddle type that sits on the cylinder which had ripped apart at all the welded seams.I have no idea how it occured and until that point thought that combustible gas under pressure would only burn outside of the cylinder, apart from the cylinder rupuring in say a house or a warehouse fire.Luckily no-one was injured but it looked just like photos I have seen of petrol storage containers that had gone up.[/quote]Methane, ethane, butane, propane, etc all belong to same homologous series and the explosion must have occured at relatively low concentrations of the gas with air indicating a gas cylinder with not much gas left in it and a leak allowing air to get into the cylinder. The explosion initiated by lighting or from a lit burner.If you take a miners safety lamp and reduce the flame so it is colourless, i.e. no yellow, in the presence of methane a blue cap can be seen on the top of the flame. At about 1% methane the cap can just be seen and increases with increasing content of methane in the air; at about 4% the cap enters the copper gauze around the flame and the lamp must be extinguished. Methane will explode from about 4.5% with easiest explosion at 7.5% and maximum explosive force at 9.8%; when the concentration of methane approaches 15% the gas will not explode. The same rationale can be applied to throwing partially filled cans of petrol on bonfires,etc,etc.Alkanes CnH2n+2. Link to comment Share on other sites More sharing options...
Chancer Posted August 3, 2010 Share Posted August 3, 2010 That was the conclusion that I came to.And not a loss adjuster in sight! Link to comment Share on other sites More sharing options...
BIG MAC Posted August 3, 2010 Share Posted August 3, 2010 At what point did you come to a conclusion, was it at flash point? It used to surprise me the amount of people who are Jack the lad when it comes to bodging things up, yet claim when stood in the ashes of their home that 'Everything was done proper'. About £7 million worth of dodgy domestic claims were investigated by our company and repudiated last year, makes you think! Link to comment Share on other sites More sharing options...
Chancer Posted August 3, 2010 Share Posted August 3, 2010 [quote user="BIG MAC"]At what point did you come to a conclusion, was it at flash point? I must be a bit thick as that has gone straight over my head, can you explain please? It was whilst having an apero and watching the French party making a drama out of a crisis (IMHO you dont need SAMU for singed eyebrows) that I reflected on what might have happened.It used to surprise me the amount of people who are Jack the lad when it comes to bodging things up, yet claim when stood in the ashes of their home that 'Everything was done proper'. About £7 million worth of dodgy domestic claims were investigated by our company and repudiated last year, makes you think!Not having buildings or contents insurance that is a situation that I will never be in.[/quote]You must have seen many examples of the human condition in your work Big-Mac, can you relate a few of the more amusing ones please?I once saw a fly on the wall documentary on insurance assessors/loss adjusters, the guy was investigating what he thought to be a dodgy claim and the fact that the insured was a motor trader added to his suspicions, are they known for being more active and inventive with their claims? Are their any other favorite groups? Link to comment Share on other sites More sharing options...
Stan Streason Posted August 3, 2010 Share Posted August 3, 2010 Boy this thread has me confused.I have a small cooker with a 13kg butane gas bottle inside one half. What is the difference between me being competent to change the gas bottle when it needs a new one or to connect a half full bottle to a new cooker if I bought one? Link to comment Share on other sites More sharing options...
pachapapa Posted August 3, 2010 Share Posted August 3, 2010 [quote user="Stan Streason"]Boy this thread has me confused.I have a small cooker with a 13kg butane gas bottle inside one half. What is the difference between me being competent to change the gas bottle when it needs a new one or to connect a half full bottle to a new cooker if I bought one?[/quote]There you are you dont know the difference......guilty as read......hand down another gas bottle guilty verdict.[:)] Link to comment Share on other sites More sharing options...
BIG MAC Posted August 4, 2010 Share Posted August 4, 2010 Maybe you are competent.......how do you prove it though? In one scenario you are working on the appliance beyond the safety device (Governor) and in the other you are making a connection intended to be carried out by end user.I would reiterate I am not especially fussed what anyone does with their gas appliances I have simply pointed out that.......Sales on new gas appliances are registeredIf it goes pop you can be sure insurers will look at thisYou will get a card through the door reminding of competency requirementsIf (And I hope it doesn't) it goes horribly wrong France is a country where you can and most likely will be sued for loss or injury, not sure whether they have punitive damages but wouldn't be surprised.A Rosbiff stood in front of the Judge and explaining why your gable end is on top of your neighbours car is not a great place to beFor the sake of 50 odd €uros .....is it worth it? Link to comment Share on other sites More sharing options...
BIG MAC Posted August 4, 2010 Share Posted August 4, 2010 Flash point ....my little gas joke not intended to be inflamnatory (another little gas joke)The documentary you watched labelled the SI people as from insurers, they weren't, in fact they were from our company, one of them sits two desks away in our office.I am not in investigations but do get to hear about some howlers yes. I also get to hear about the sad instances where people are massively under insured or think they are adequately covered and are not.Insurers tend to be reasonably compassionate but they are businesses and need to run like businesses.There are many people out there who are prepared to lie and for those who are, there are quite sophisticated ways of showing them up, voice stress analysis for instance......'This call may be saved for training purposes' etc. I do sometimes wonder what that really means, don't you? Link to comment Share on other sites More sharing options...
bigears Posted August 5, 2010 Share Posted August 5, 2010 HiI bought a stoves cooker from the uk and installed it here in france. I have my bottle in the next room so a metal pipe has to go through the wall in an appropriate cobduit. I have no leaks and it has been working fine for over two years. When we sell the house I will undo all the work and take the cooker with me. If you do work correctly you will not have any operational problems. I do all my own work, building and mechanical,, I just don't trust another to do my work. Link to comment Share on other sites More sharing options...
pachapapa Posted August 5, 2010 Share Posted August 5, 2010 Snap!Got almost the same set up but I used a piece of yellow garden hose. Link to comment Share on other sites More sharing options...
BIG MAC Posted August 5, 2010 Share Posted August 5, 2010 Sounds as though it should all be fine. I particularly like the added safety touch of using the correct colour of pipework to convey the gas. Link to comment Share on other sites More sharing options...
pachapapa Posted August 5, 2010 Share Posted August 5, 2010 [quote user="BIG MAC"]Sounds as though it should all be fine. I particularly like the added safety touch of using the correct colour of pipework to convey the gas. [/quote]Thanks for your Q.E.D.Nice german stuff rated at 18 bars, now then that will be 18,000,000 pascals give or take a few. Sorry cant read my sliderule in the dark watching bullfighting on telly. But it should cope with the 28 pascal butane "détendeur". Link to comment Share on other sites More sharing options...
BIG MAC Posted August 6, 2010 Share Posted August 6, 2010 Sounds like you may need a new telly.....Actually a Bull rule may be handy here also, sliding or otherwise!Strange to have a garden hose rated to carry lpg......Bliddy germans think of everything! Link to comment Share on other sites More sharing options...
pachapapa Posted August 6, 2010 Share Posted August 6, 2010 Water pressure @ 18 bars not gas pressure.I see you are more aquainted with the détendeur in your diving suit. Anothe good german line. Link to comment Share on other sites More sharing options...
BIG MAC Posted August 6, 2010 Share Posted August 6, 2010 And of course water and LPG both deteriorate plastics in a similar fashion don't they?Perhaps you are more familiar with the funny one liner than lines suitable for the conveyance / containment for liquified gases.The use of water pipe to convey LPG is clearly fuelish but I suspect the knowledge may come to you in a flash. Link to comment Share on other sites More sharing options...
dragon Posted August 31, 2010 Author Share Posted August 31, 2010 As i posted the initial question i feel duty bound to update you all with the fact that i bought a new gas cooker from Darty along with a connecting cable (199euro for the lot) i have installed the cooker and it is working fine. Nothing more than a spanner needed! Thanks for all the feedback, even the scaremongers! Link to comment Share on other sites More sharing options...
BIG MAC Posted August 31, 2010 Share Posted August 31, 2010 I sincerely hope that the tapered thread to the appliance has been soundly PTFE taped.......actually why do I bother....carry on I am sure it will all be fine...... Link to comment Share on other sites More sharing options...
LEO Posted August 31, 2010 Share Posted August 31, 2010 Hi Dragon,I did near enough the same as you two years ago,without any incidents or problems.Ignore the scaremongers!I am from Govan , which is Rab C.Nesbit country,enough said! Link to comment Share on other sites More sharing options...
BIG MAC Posted August 31, 2010 Share Posted August 31, 2010 Apparently Glaswegianship automatically imparts Clydeside engendered engineering expertise ......Hang on a moment...I am a Glaswegian...with 32 years construction experience most of it M&E related......Yep gas work...any idiot can do it......official Link to comment Share on other sites More sharing options...
dragon Posted September 1, 2010 Author Share Posted September 1, 2010 Yep, PTFE tape was soundly used! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.