Marym2 Posted July 27, 2004 Share Posted July 27, 2004 HiAs we have a old Bulter sink and the sink in the house is quite grotty, we are thinking of bringing it over and using that. Has anyone done this and fixed one here, and if so did they use french fittings or bring them from England?Thanks Link to comment Share on other sites More sharing options...
Kevinandval Posted July 28, 2004 Share Posted July 28, 2004 We bought an old french china sink in france to fit in our french house, we could not buy any of the fitting (s bend etc.) in france, we bought the sink home to england went to the nearest plumbing merchants and got everything we needed! so I think you are best taking all the parts you need with you. Link to comment Share on other sites More sharing options...
Bobc Posted July 28, 2004 Share Posted July 28, 2004 If you go to a specialist plumbing supplier rather than a 'brico' you will be able to purchase all of the fittings that you require.My suppliers, Wendels in Villeneuve-sur-Lot carries a huge range of fittings and adaptors and has enabled me to fit all types of sinks and also thermostatic shower mixers onto 30 year-old narrow spaced feed pipes.Certainly no need to source any parts from the UK!Kind regards,Bob Clarkehttp://perso.wanadoo.fr/grindoux Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now