Buzby Posted September 22, 2005 Share Posted September 22, 2005 Owing to a slight error in installation, I now need a white stove-enamelled straight pipe 45mm longer than the standard 1 metre length, ie 1.045 metres. The pipe inside diameter is 120mm. The existing pipe has male and female ends within the 1 metre lengthIs it possible to obtain non-standard lengths, and if so where from?John West Link to comment Share on other sites More sharing options...
Gyn_Paul Posted September 24, 2005 Share Posted September 24, 2005 AFAIK, you have to buy another 500mm length and cut it. It will take all afternoon with a hacksaw, or 10 minutes with a metal cutting disk in a grinder (be sure to mark it well or you'll find your cut drifting off-line as you go round.)paul Link to comment Share on other sites More sharing options...
Buzby Posted September 24, 2005 Author Share Posted September 24, 2005 Thanks, Paul. I know where I can obtain standard lengths of pipe, so I'll now go and buy a metal cutting disk and mark the pipe as you say.John Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now