JeanS Posted August 3, 2009 Share Posted August 3, 2009 Any one know where I can get a wheel bearing for a Conway trailer. I'm in 36 near to Chateauroux Link to comment Share on other sites More sharing options...
Sunday Driver Posted August 3, 2009 Share Posted August 3, 2009 Get the part number off the old bearing and contact a motor factor - Autodistribution, 34 av Argenton, 36000 CHÂTEAUROUX. Link to comment Share on other sites More sharing options...
Bugsy Posted August 3, 2009 Share Posted August 3, 2009 I might be able to help you as I have a complete set of trailer bearings here. I just need the numbers off the side of your bearings. Link to comment Share on other sites More sharing options...
JeanS Posted August 4, 2009 Author Share Posted August 4, 2009 Thanks - I have sent you a pm Link to comment Share on other sites More sharing options...
Gluestick Posted August 4, 2009 Share Posted August 4, 2009 A Webref worth remembering is this : http://www.bearingboys.co.uk/Vee_&_Wedge_Belts-1025-c?gclid=CPPmspTEmZQCFQWR1QodmnIztgMost modern caged bearings ball or roller are pretty standard: and these guys simply need the dimensions to provide suitable replacements.They are also excellent for Kevlar drive belts for mowers and ride-ons: fraction of the normal inflated price.Most vendors will ship to France these days per mail. Link to comment Share on other sites More sharing options...
AnOther Posted August 4, 2009 Share Posted August 4, 2009 As Gluey says it's highly unlikely to be anything other than a standard off the self item which will be available from any distributor, you just need the number which will be engraved on the outer race.If you've had one go then to be safe I would buy a complete set of 4 (2 for each side although not necessarily the same type so check first) and do the job properly, shouldn't cost very much and you can keep a pair of the old ones as emergency spares [;-)] Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.