MKT Posted May 28, 2010 Share Posted May 28, 2010 Hello,The belt has gone on my Guy Noel betonniere (cement mixer). I cannot find any working website for Guy Noel, nor anybody selling spare parts for them. Can anybody point me in the right direction to buy spare parts/consummables for these machines? Very grateful if anybody can.Maria Link to comment Share on other sites More sharing options...
thunderhorse Posted May 28, 2010 Share Posted May 28, 2010 If you get stuck, take the old belt into an agricultural suppliers. Likely they'll have vast quantities for all sorts of machines and something will fit. Link to comment Share on other sites More sharing options...
Dave&Olive Posted May 28, 2010 Share Posted May 28, 2010 hi ok get my mower belts from here save a fortune ....http://www.mowerbelts.co.uk/Mowerbelts.htm Dave http://www.mowerbelts.co.uk/Mowerbelts.htm better Link to comment Share on other sites More sharing options...
Gluestick Posted May 28, 2010 Share Posted May 28, 2010 These chaps are extremely helpful and rapid: this is where my Kevlar tractor mower belts come from:Here: Link to comment Share on other sites More sharing options...
Théière Posted May 29, 2010 Share Posted May 29, 2010 V belts come in basic sizes "Z, A, & B, or SPZ, SPA, & SPB" according to their profile, all you need then is the length. Lawnmower manufacturers often specify non standard lengths and then charge 4x as much, I changed the pulley size and now buy standard belts which are available everywhere at a quarter the cost. Link to comment Share on other sites More sharing options...
MKT Posted May 30, 2010 Author Share Posted May 30, 2010 Thanks people, have ordered one the right size from an industrial supplier - its not specifically for cement mixers but none of those lawnmowere belts are anything like the right sizes. It was forty euros with postage, so a bit of an expensive punt if it doesnt work but a good saving if it does. Link to comment Share on other sites More sharing options...
Théière Posted May 31, 2010 Share Posted May 31, 2010 No belt is specifically for anything, the construction varies due to work load ie kevlar reinforced. When the belt arives the size will be written down the back of the belt. Take a note of it (inside your motor housing is good) and then you can order off the net at a fraction of what you have paid. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.