Geranium Posted March 27, 2005 Share Posted March 27, 2005 We are having our kitchen done and I fancy a stone worktop. First I fancied limestone but have heard that it stains very easily. I don't fancy polished granite - too bright and shiny for me. I fancy either dark grey (yes I know I'm probably looking at slate) or something very pale. Does anyone have any suggestions?I shall also be hunting for a row of kitchen units (which I could get from IKEA in Toulouse, but again, any other suggestions?)We are in between Albi and Toulouse. I heard rumours of a place near Carcassonne too. Thank you in anticipation! Link to comment Share on other sites More sharing options...
Bobc Posted March 28, 2005 Share Posted March 28, 2005 Look into poured-in-place concrete worktops.You can achieve exactly the colour and finish that you are looking for - without any joints!Kind regards,Bob Clarkehttp://perso.wanadoo.fr/grindoux Link to comment Share on other sites More sharing options...
Cerise Posted March 29, 2005 Share Posted March 29, 2005 There are a number of kitcheny type places on the Puygouzon estate just outside Albi - including Lepeyre and Hygena. Don't know what they are like. We got plain wood units, which you can stain/paint/do whatever with from Bricorama also at Puygouzon. Worth asking a local macon about stone worktops. Maggi Link to comment Share on other sites More sharing options...
Geranium Posted March 29, 2005 Author Share Posted March 29, 2005 Thank you for the info so far. Bob, you bring me to another question. Units have been built in the house - some in the kitchen, a couple in bathrooms - out of concrete but I am wondering how I can finish them. I dont fancy them all tiled.I've heard of waxing concrete and maybe polishing, but what are the techniques exactly, and how do you obtain different finishes? Link to comment Share on other sites More sharing options...
Bobc Posted March 29, 2005 Share Posted March 29, 2005 "I've heard of waxing concrete and maybe polishing, but what are the techniques exactly, and how do you obtain different finishes?"Probably too complicated to go into on the Forum.Have a look at this link - http://www.taunton.com/store/pages/070599.aspIf you are interested in alternative worktops then it is worth investing in the book. As with all titles from Taunton Press, high quality and good value.It you decide to try this approach then it is worthwhile to make up some small test worktop frames to experiment with.Concrete worktops are probably a minority interest on the Forum. If you are interested in experimenting with them, then please e-mail me at the address in my profile.Kind regards,Bob Clarkehttp://perso.wanadoo.fr/grindoux Link to comment Share on other sites More sharing options...
Geranium Posted March 30, 2005 Author Share Posted March 30, 2005 I'm going to reply on the forum first because concrete is used a lot for worktops and units in France, especially in the south. There are moulded concrete shelves and fancy bits in our kitchen that always crop up in the various home magazines. The bath has a concrete surround and so do the sinks.I think in a lot if not all cases, they are tiled over or painted and I have been wondering about the different finishes. I guess you can just paint (and I've seen fabulous dark grey used in a bathroom) but I'm not sure what paint one would use and what if any, wax or varnish?I'm very happy to email you as you've obviously looked into this yourself, but I wonder if you have useful information that could benefit others? Link to comment Share on other sites More sharing options...
Kazanton Posted March 30, 2005 Share Posted March 30, 2005 If you fancy a stone worktop, the cheapest place to acquire one is at a 'Memorial Masons' the people who do headstones. Honest. Great selection of finish, colour, etc. Link to comment Share on other sites More sharing options...
Maddie Posted March 30, 2005 Share Posted March 30, 2005 [quote]If you fancy a stone worktop, the cheapest place to acquire one is at a 'Memorial Masons' the people who do headstones. Honest. Great selection of finish, colour, etc.[/quote]EXACLTY what I was going to suggest! I keep telling MOH I'll do that and get the underside pre-engraved (with his details) for later use (ommitting the latter date of course - wouldn't want to give anything away after all) Link to comment Share on other sites More sharing options...
Bobc Posted March 30, 2005 Share Posted March 30, 2005 "I think in a lot if not all cases, they are tiled over or painted and I have been wondering about the different finishes. I guess you can just paint (and I've seen fabulous dark grey used in a bathroom) but I'm not sure what paint one would use and what if any, wax or varnish?"We seem to be talking about different things.Poured in place concrete worktops are floated and then polished to achieve the degree of matt/satin finish that you require. They are not intended to be tiled over or painted. The colour is obtained by the concrete mix that you use and any added elements such as quartz or mica.Kind regards,Bob Clarkehttp://perso.wanadoo.fr/grindoux Link to comment Share on other sites More sharing options...
Geranium Posted March 31, 2005 Author Share Posted March 31, 2005 These poured in place concrete jobs do sound interesting. I had a look at the book you mentioned Bob; does this book go into these particular types of worktops? Also it is quite straightforward to get these done in France?Does anyone else have experience of concrete inside the home? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.