nick16 Posted January 29, 2010 Share Posted January 29, 2010 We have an open veranda next to our swimming pool, and the floor tiles which are ceramic are like an ice rink when wet. The floor area is about 30 square metres, so replacing the tiles would be an expensive option. Can anyone reommend a product that could be applied to the tiles, making them safer. I am putting this post in both 'swimming pool' and 'renovations' Link to comment Share on other sites More sharing options...
Bugsy Posted January 29, 2010 Share Posted January 29, 2010 A thin coat of epoxy resin on clean dry tiles, sprinkled with salt whilst the resin is wet will give a good non-slip finish. The salt washes away when its all dry and leaves no residue.Sand can also be used but it stays in the resin and looks dirty very quickly.Hope this is of use. Link to comment Share on other sites More sharing options...
Bugsy Posted January 30, 2010 Share Posted January 30, 2010 Thanks Bugbear.No problem, glad to help!!. Link to comment Share on other sites More sharing options...
Théière Posted January 30, 2010 Share Posted January 30, 2010 Bugbear's idea sounds interesting, although accurate laying out would improve the look so try it with a template with maybe 30mm holes in so it produces a dot pattern.The one I have usedhttp://www.diytools.co.uk/diy/Main/sp-58-4459-3102-hg-permanent-anti-slip-500ml-for-floors.asp Link to comment Share on other sites More sharing options...
Théière Posted January 31, 2010 Share Posted January 31, 2010 Thanks Théière.No problem, glad to help!! Link to comment Share on other sites More sharing options...
Bugsy Posted January 31, 2010 Share Posted January 31, 2010 .[Www]I hope he's OK, you don't think he's come a cropper on those slippy tiles by any chance [:P][:D]. Link to comment Share on other sites More sharing options...
chirpy Posted February 3, 2010 Share Posted February 3, 2010 I f you mix the sand with the epoxy ,then the surface will not look as dirty .depending on size and quantity you add ,naturally.I would recommend 10% of sand and try a small patch first to see if you are happy with it.From a retired paint technologist.BETTER TO HAVE A SLIGHTLY DIRTY APPEARANCE THANA TRIP TO THE HOSPITAL[:D] Link to comment Share on other sites More sharing options...
chirpy Posted February 3, 2010 Share Posted February 3, 2010 p.s. forgot to say that you should abrade the surface first to help the adhesion of whatever product you choose ,otherwise it will eventually peel off.Mixing the non slip material saves you having to walk over the wet oaint to sprinkle the non slip material.otherwise you will be buying new shoes!!!!!!!!!!!!!!!!If you get around to replacing tiles then buy the porous non slip type.I have had a pool with these tile for ten years without accident,but there is an adjoining area where smooth non absorbent tiles were laid and these are a death trap for the unwary. Link to comment Share on other sites More sharing options...
nick16 Posted February 3, 2010 Author Share Posted February 3, 2010 Thank you to those who replied. I only have access the internet on a patchy basis, so don't often see replies foe a few days. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.