ADSL Modem.

[Pancake]

When I move from Australia to France this year will my ADSL modem work on your phone system ?I did contact Netcomm but they seemed a bit unsure mumbling something about the FT line code system may be different.....I have a Netcomm NB1300 Plus 4.

[Kalyn Computers]

Chances are that it will work. You will need to change the VPI & VCI value for the French system and enter the user name and password issued by yor French ISP.

 

HTH

 

Tim

[Simon_Catlin]

[quote user="Kalyn Computers"]

Chances are that it will work. You will need to change the VPI & VCI value for the French system and enter the user name and password issued by yor French ISP.

 

HTH

 

Tim

[/quote]

Tim, for the rest of us, what are the VPI and VCI for France?

[Pancake]

Kalyn Computers

Ok.Thanks for that info.I will bring it along with me.....I will have to find out which  numbers I will need when I get a provider..[:)]

 

Simon.....

Not sure if you set it up to France Telecom or to the provider you use.The most important information to enter to get a DSL Modem working is the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) . These two numbers simply tell the DSL equipment on both ends that they should talk to each other, almost the same as replacing a dialed number. Each DSL Provider uses a set of these two numbers.Below is an example of three providers....You change these within the modem by entering it settings.

DSL Extreme 0/35

BellSouth 8/35

Earthlink 0/35

 

Edit.......

Found all world setting here:

http://www.patton.com/support/faqs_detail.asp?id=142

More French providers here:

http://www.routertech.org/pages.php?page=43

We have the same settings as France....[8-|]