Falcone Posted June 14, 2008 Share Posted June 14, 2008 Hi everybody I'm new here,Has anyone any information on the "@Sky" (Not "Sky") satellite box. I have been given two of these which are about 6 years old and unused. They were aimed at the French market although they were also sold in the UK and have guides in English and French. I would not normally be interested in a box this old but they have a USB connector and some fairly sophisticated PVR software which enables control from a windows PC. They also have a card reader with CA based on eurocrypt standard and 2 cam slots. Under the hood the box (built in China) is well screwed together and has a proprietary @Sky chip on the circuit board. Unfortunately the company doesn’t seem to exist anymore – a victim of the legal department perhaps? Link to comment Share on other sites More sharing options...
Martin963 Posted June 14, 2008 Share Posted June 14, 2008 The only bell this rings with me was an internet-by-satellite scheme, however I'm not even sure I'm right on that, and anyway if it was that why the CAM slots.It sounds a very interesting beast.... and presumably will still PVR the FTA stuff....? Link to comment Share on other sites More sharing options...
BJSLIV Posted June 14, 2008 Share Posted June 14, 2008 Is it one of these?http://www.leboncoin.fr/vi/15898526.htm?ca=11_s Link to comment Share on other sites More sharing options...
Falcone Posted June 15, 2008 Author Share Posted June 15, 2008 Hi,Thank you both for your prompt response - yes the box in the link is exactly the box and specification.Do you happen to know if it is possible to update the software and from where it could be downloaded?Many thanks Link to comment Share on other sites More sharing options...
Martin963 Posted June 15, 2008 Share Posted June 15, 2008 Now that BJSLIV has identified the box, you could look athttp://www.my-neotionbox.tv/fr/index.php?rub=T%E9l%E9chargements&page=05_T%E9l%E9chargements/01_Firmwares.phpalthough there doesn't seem to be any current software, just an email address to contact.But you never know, they might turn out to be helpful.... Link to comment Share on other sites More sharing options...
Falcone Posted June 15, 2008 Author Share Posted June 15, 2008 Many thanks for the link Martinwatkins - thats much more than I had before and I will email them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.