Dave&Olive Posted December 28, 2008 Share Posted December 28, 2008 hi ok We are running 2 sky boxes from 1 dish with a quad LNB ,this has worked ok for the past 3 years , one sky box in the gite just has the free view card for ch 4&5 etc , ours has a few pay to view channels on it ....but for some reason we now have to turn on the sky box in the gite to watch some channels on our box ??? ,eg if say i am watching ch 4 and you turn the box off in the gite our TV comes up with the no signal being received warning ... any ideas thanks Dave Link to comment Share on other sites More sharing options...
Anton Redman Posted December 28, 2008 Share Posted December 28, 2008 Check the connections are tight at both ends. Swop the boxes and see if the problem moves. Swop the connections at the LNB end and see if the problem moves. Try using one of the unused pair of connections. Probably a marginal alignment problem. Link to comment Share on other sites More sharing options...
Dave&Olive Posted January 5, 2009 Author Share Posted January 5, 2009 hi ok just for info ,.... it was a Dicky scart lead !!!! Dave Link to comment Share on other sites More sharing options...
Anton Redman Posted January 6, 2009 Share Posted January 6, 2009 Thanlks hope you found it before you tried the swopping the LNBs Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.