Jump to content
Complete France Forum

Recommended Posts

Electronically they are near identical but they have a smaller neck and have a different method of attachment to the arm. See adaptors as below:

http://www.satcure.co.uk/accs/page1a.htm

There is no special skill required to change on. Just check the dish is tight, unscrew the  co axial cable, themove the existing LNB, push on new LNB, screw in co ax connector, check signal quality and seal with boot or self amalgamating tape. A little entertaining if you are 7 metres up a ladder.

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...