cooperlola Posted November 23, 2010 Share Posted November 23, 2010 I've suddenly lost all the Sky channels and there is a message saying "There is a technical fault with this channel. Please try later." The signal test is blank.I don't think it's my dish as the Freesat decoder is working normally.Anyone else got a problem or has the box gone on the fritz? Link to comment Share on other sites More sharing options...
cooperlola Posted November 23, 2010 Author Share Posted November 23, 2010 If anybody on Sky could just check their box, I'd be grateful. Law and Order's on in 20 minutes![:D] Link to comment Share on other sites More sharing options...
NickP Posted November 23, 2010 Share Posted November 23, 2010 [quote user="cooperlola"]If anybody on Sky could just check their box, I'd be grateful. Law and Order's on in 20 minutes![:D][/quote]All in working order in St Jacques, make sure you haven't pulled the aerial cable Link to comment Share on other sites More sharing options...
Tim Posted November 23, 2010 Share Posted November 23, 2010 Well, I haven't plugged my Sky box in for nearly two years, but I'm confident in saying that it's your box.Both systems use the same satellite, so if your freesat receiver is working (as is mine) the transmissions from the satellite are fine. Regards - Tim Link to comment Share on other sites More sharing options...
cooperlola Posted November 23, 2010 Author Share Posted November 23, 2010 Thanks chaps. I'll re-boot it - that sometimes works.[:)] Link to comment Share on other sites More sharing options...
cooperlola Posted November 23, 2010 Author Share Posted November 23, 2010 Phew - managed it before 7 o'clock so my daily fix is unaffected! Turned it off for a couple of minutes and all is back to normal. It's such a hassle for me these days to fiddle about behind the TV that I like to know it's not a general problem before I start messing about and it is not the o/h's department.[Www] Your assistance was invaluable, as per, chaps.[B] Link to comment Share on other sites More sharing options...
mik Posted November 23, 2010 Share Posted November 23, 2010 Same thing happened here. Switched it off and on then everything returned to normal Link to comment Share on other sites More sharing options...
AnOther Posted November 23, 2010 Share Posted November 23, 2010 You are not alone coops.............http://www.totalfrance.com/france/forum/viewtopic.php?p=873654#873654Also a Google search will reveal lots of others with the same.2 of my 3 boxes did it the day after we left for 10 days in UK so all of our scheduled recordings were just of that bl00dy screen, grrrrr Link to comment Share on other sites More sharing options...
Weedon Posted November 27, 2010 Share Posted November 27, 2010 This has happened to me fairly requently just lately. I found that by going to [Services] on the remote then pressing [4 System Setup] then pressing [8 System Health Check] the bottom window fills up to 15 and all is well. Press [Sky] and everything is working again. Link to comment Share on other sites More sharing options...
woolybanana Posted November 27, 2010 Share Posted November 27, 2010 These things happen after vigorous hoovering and knowing that Coops is a vacuuming fanatic, I think the problem may be there! Link to comment Share on other sites More sharing options...
Anton Redman II Posted November 28, 2010 Share Posted November 28, 2010 I put a switch onto the power lead so I could switch off digibox without in plugging. Also if your Tableau has one feed for the TV just fluip the disjointer. Link to comment Share on other sites More sharing options...
Iceni Posted November 28, 2010 Share Posted November 28, 2010 [quote user="woolybanana"]These things happen after vigorous hoovering and knowing that Coops is a vacuuming fanatic, I think the problem may be there![/quote]Sorry have no idea what you mean - I cannot keep up with all these new euphemisms.John Link to comment Share on other sites More sharing options...
AnOther Posted November 28, 2010 Share Posted November 28, 2010 I though my quad LNB had died yesterday morning when I found zero signal quality on all my boxes, that was until I looked out of the window and saw the snow, so I went out and checked my dish only to discover a build up on the LNB arm blocking it completely. Fortunately the dish it is mounted under the eaves at the end if the house and only about 8ft high so a slight tap with a broom soon sorted it out [:)] Link to comment Share on other sites More sharing options...
cooperlola Posted November 28, 2010 Author Share Posted November 28, 2010 [quote user="woolybanana"]These things happen after vigorous hoovering and knowing that Coops is a vacuuming fanatic, I think the problem may be there![/quote]Yeah, right.As it happens, I have a cleaner (whom the b*st*rd lorry driver's insurance pays for, I might add!) and, as much as I appreciate her, she does annoy me when she insists on cleaning behind the telly, whereupon all the silly peritels fall out - thus I come back from hospital to find that nothing has recorded while I've been out.[:@] I mean, who looks behind the tv, for goodness's sake? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.