audio Posted May 17, 2011 Share Posted May 17, 2011 I tune mine to say channel 300 in the evening for a late recording but by the next morning it has changed back to the default channel of 101.Possibly EDF tweaking their volts and amps.Has anyone else with problems with Humax Foxsat-HD receivers? Link to comment Share on other sites More sharing options...
sid Posted May 17, 2011 Share Posted May 17, 2011 The only issue I have is with the handset, which seems to be getting a bit hit-or-miss with the buttons... but that's another story!I haven't understood your problem properly; are you saying that you have set the box to record a program, or just selected channel (say) 300 and left it on there?If it's a properly set recording (check it in the "schedule" list) then it should record that even if the power is switched off and back on again; we often get power "glitches" here, those very short power cuts, which often cause the box to re-boot, no problem with the schedule list and it doesn't come back on a different channel either. Link to comment Share on other sites More sharing options...
audio Posted May 17, 2011 Author Share Posted May 17, 2011 Thanks Sid.Mine does not have a recording facility. I have selected a channel on the Humax for recording on another device. This channel reverts to the default i.e. 101 by the morning, exactly when I do not know. Link to comment Share on other sites More sharing options...
Clair Posted May 17, 2011 Share Posted May 17, 2011 There is an option in the menu for our Humax to wake up on a preset default channel:Menu/Settings/Time/Power ON Channel Link to comment Share on other sites More sharing options...
audio Posted May 17, 2011 Author Share Posted May 17, 2011 Thank you Clair. I will try that next time.Incidentally, the power save mode was disabled. Link to comment Share on other sites More sharing options...
sid Posted May 17, 2011 Share Posted May 17, 2011 Sorry! HD/HDR confusion at this end! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.