Iceni Posted August 14, 2004 Share Posted August 14, 2004 VMC is in and working - but only with (?) 80mm flexible pipe. Now we are about to start work upstairs the exhaust pipes must be fitted neatly between ceiling and floor but the flexi is not too keen on this (particularly as someone insisted that the plasterboard had to be fitted between ceiling joists and not under). Local bricos claim never to have seen rectangular section or 90 deg bends that would solve my prob.Do they exist pls ? If so, pls point me in the right direction. If not, how have other people solved this prob. ?TIAJohn http://www.iceni-it.co.uk Link to comment Share on other sites More sharing options...
Mysfloss Posted August 14, 2004 Share Posted August 14, 2004 dont know if they exist,maybe you could use a bend in plastic(gutter,drain etc)and tape them together. Link to comment Share on other sites More sharing options...
SC Posted August 14, 2004 Share Posted August 14, 2004 Castorama have rectangular rigid ducting with bends and converters to round section.sc Link to comment Share on other sites More sharing options...
zeb Posted August 15, 2004 Share Posted August 15, 2004 HI John and Di - ours is squashed a bit upstairs where it comes down a wall where the plasterboard is pretty close to the jutting out rocks in places - it still works OK downstairs though!Don't know how we managed without it - no stale air in rooms next morning after spicy food/drinking and baccy nights, no fear of CMP, no pooey smelling bathrooms, etc but sometimes a bit chilley in January so have been known to switch it off during the day! Does it exist in GB?regards.......helen Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.