Orion Posted April 5, 2005 Share Posted April 5, 2005 Following my previous 3 questions I have a supplemental query about electrical cabling.Can cable (u - 1000 - R2V I think) be used in gaine internally. I have voids along both sides of the 1st floor (combles) where I can easily and quickly run these cables ( I bought lots at a bargain promotional price) and then they will go down into solid stone walls or into timber/plasterboard stud walls to the prises, switches and wall lights. I understand that I shouln't run the u - 1000- R2V in the stud walls 'bare' as these are not 'vides de construction'Can I for example run from the fuse board to a junction box in u - 1000 - R2V cable and switch to the individual 'fils' in gaine for the down parts of the circuit in the walls?ThanksBill Link to comment Share on other sites More sharing options...
Alcazar Posted April 5, 2005 Share Posted April 5, 2005 I'm pretty sure I've seen a diagram in a book showing just what you describe...............and since it didn't have a big red X through it, I can't see a problem.Alcazar Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.