KathyC Posted November 12, 2006 Share Posted November 12, 2006 I've just had the opportunity to buy some really nice kitchen doors on ebay (UK) and I thought I might buy them and put them on bog standard French carcases. The sizes fit with what's available in France but my husband's just suggested that the way the doors attach to the cabinets may be different between the two countries. I wonder if anyone has any experience with this? We could take the UK fittings with us or buy them in France but would hate to lug them all the way over and find we can't use them. Does anybody have any knowledge about this that they could help me with? Thanks. Link to comment Share on other sites More sharing options...
cooperlola Posted November 12, 2006 Share Posted November 12, 2006 A quick look at the hinges in my French kitchen cabinets - they look just like the UK ones to me. Link to comment Share on other sites More sharing options...
Dick Smith Posted November 12, 2006 Share Posted November 12, 2006 Screwfix show two sizes, 26mm and 35mmhttp://www.screwfix.com/app/sfd/cat/pro.jsp?id=12202&ts=23968http://www.screwfix.com/app/sfd/cat/pro.jsp?id=14751&ts=23968I would think that one or the other would do - and at £1.69 a pair you aren't risking much! Link to comment Share on other sites More sharing options...
wtg Posted November 12, 2006 Share Posted November 12, 2006 The holes for the hinges on the carcasses probably wont match up with the doors so you just drill new ones on the carcasses dont go to deep though.eg doors from say b&Q dont line up with carcasses from mfi Link to comment Share on other sites More sharing options...
Chancer Posted November 12, 2006 Share Posted November 12, 2006 The centres between the hinges and the distance from the top/bottom of the door may not be the same, this can also be true using UK bought cabinets.If this is the case you may have to reposition one or both hinges using a 26 or 35mm forstner wood cutting bit, I usually only do this when I cut a door down and lose one hinge pocket, it is usually far easier to reposition and redrill the locating holes in the side of the receiving cabinet.Editted, if you don't already have the carcasses in France consider using UK ones, the B & Q flat pack ones are usually available off the shelf. I recently did a kitchen in England with B & Q carcasses followed by one in France using Brico-Depot (same group of companies)carcasses. I found the B & Q ones generally to be better quality, cheaper and with a wider range.Kitchens are one of the few things that are (again generally) cheaper and better in the UK because it is a more mature market, however the prebuilt pre-equipped kitchens from Brico-Depot cannot be beaten for price and the quality is excellent as both the cabinets and doors are 18mm rather than 16mm thick.Editted again, this was posted at the same time as the last more concise and to the point one Link to comment Share on other sites More sharing options...
KathyC Posted November 12, 2006 Author Share Posted November 12, 2006 Gosh, what amazingly quick responses. I'll go ahead and buy them and know that I can make adjustments if necessary.Thanks everybody.(Edit)JRJust read your post. I could buy the carcases from the same buyer (in fact the same price!) but transportation's the problem. I'm planning to use the doors with carcases from Brico Depot and get a cheap, but expensive looking kitchen. (Well, that's the plan.) Thanks again. Link to comment Share on other sites More sharing options...
Chancer Posted November 12, 2006 Share Posted November 12, 2006 Kathy.I understand all too well the problems of transport but perhaps you could if the carcasses are flat packed? I suppose it depends on the sizes of the kitchen and your car. Link to comment Share on other sites More sharing options...
Dick Smith Posted November 12, 2006 Share Posted November 12, 2006 Won't it be easier to retain the spacing on the doors and reposition the hinges on the carcase?According to Steve (Kitchen Fitter) you are unlikely to find 26mm hinges in use these days. I believe that Screwfix sell a bit and jig for this operation. Link to comment Share on other sites More sharing options...
Gluestick Posted November 13, 2006 Share Posted November 13, 2006 About three years ago, I replaced the hinges on a built-in fridge door for a chum.His very upmarket solid oak doors French kitchen units and fittings seemed identical to UK types to me. Hinges easily bought from a local Bricomarche branch. Only main difference were the French-style brass effect vertical exterior faux hinges.One thought: if you are compelled to change hinge positions, try asking a local (UK) kitchen biz if they can help you with plastic blanking plugs. These are available in a variety of colours to match different carcasses and in both usual hole sizes, and both hinge ends where they are different; mainly because most carcasses are pre-drilled for a number of different applications. Just a thought. Link to comment Share on other sites More sharing options...
sheldonrobbo Posted November 13, 2006 Share Posted November 13, 2006 hi I'm fitter by trade and would firstly be very wary about buying doors without first examining them. Modern kitchen doors warp very easily if not stored correctly (i.e. dead flat). Once warped they can be very difficult to get a proper fit. The problem with hinge holes is easily overcome as has been suggested in previous posts, but even with my experience i don't think i could be bothered to lug all the stuf over here when the available french doors and carcasses are perfectly ok. Its just a case of shopping around to get what you want and far better that than having kitchen units full of holes and blanking plugs . Link to comment Share on other sites More sharing options...
KathyC Posted November 13, 2006 Author Share Posted November 13, 2006 SheldonThanks for your comments and the warning. Fortunately I'm going to be able to check the doors before buying and will now be careful to look for warping. I rather agree with you about the carcases but the doors are solid wood, such good quality and such a bargain that I'm going to risk it. Link to comment Share on other sites More sharing options...
Anton Redman Posted November 13, 2006 Share Posted November 13, 2006 The only French kitchen units which seem to be very different from the UK are Le Peyre. IKEA are the same in UK and France.and would probably be my choice of base units. Link to comment Share on other sites More sharing options...
Gyn_Paul Posted November 13, 2006 Share Posted November 13, 2006 Beware - I was given some (UK) Hygena units, and tried to suppliment them with French cabinets - principally a sink base unit - only to find they are different heights.p Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.