oldgit72 Posted July 8, 2008 Share Posted July 8, 2008 Has anyone knocked through a 2 metre hole in an external wall to take double doors? Is there an online guide avaiable? Thanks Link to comment Share on other sites More sharing options...
zeb Posted July 8, 2008 Share Posted July 8, 2008 Could be highly dangerous if you don't know what you are doing, and sometimes pretty scarey if you do, so best advice is to get a builder in. Will probably cost you between 1K and 2K euros depending on porte fentre and finish (stone reveals etc) Link to comment Share on other sites More sharing options...
Val_2 Posted July 8, 2008 Share Posted July 8, 2008 Not only that, you will need an RSJ of some description to hold the top up, stone lintels are very heavy to lift in (we have had to hire a manitou in the past a few times for double door lintels) and steel ones will be difficult too. Wooden lintel may be easier. Suggest you get an expert in to do a proper job if you have no previous experience as knocking stone walls through is not easy and can easily go off course and get out of hand plus you need to use the right materials and methods. Don't forget you also need permission to put these in as well as you are altering the outside appearance. Link to comment Share on other sites More sharing options...
La Guerriere Posted July 9, 2008 Share Posted July 9, 2008 Let us known how thick your wall is. then we might be able to be constructive. Whatever you do it will certainly involve a huge amount of stone coming out / down. In my crystal ball I see acrow props (etais en Francais), blood, sweat, dust, tears and maybe a cast in-situ lintel to hold up the stone that fills in the large triangular hole where all the stones fell out. Deep joy. Link to comment Share on other sites More sharing options...
Lee&Nik Posted July 9, 2008 Share Posted July 9, 2008 you can always use oak lintels inside and out then shutter and pour a concreet lintel to hold the weight. but my advice is if your clueless better go get a builder to assist you mate or you may end up with a pile of stones. Link to comment Share on other sites More sharing options...
Just Katie Posted July 9, 2008 Share Posted July 9, 2008 Nah do it yourself Oldgit [:-))]. Dont forget to prop as you go though or you may come out with a few little bumps on the head. Seriously though please take the advice given, this is genuinely not a job for the novice. Link to comment Share on other sites More sharing options...
trees 2 Posted July 9, 2008 Share Posted July 9, 2008 While we were over at Whit, I paid someone to knock through a metre thick wall for a 120mm flue pipe.The amount of stone that came out, and the muck that was produced, was amazing. It took him most of an afternoon, and he only charged €50.Get a builder in. Link to comment Share on other sites More sharing options...
bigears Posted July 10, 2008 Share Posted July 10, 2008 hiI've knocked a few holes in old stone walls for windows, french windows and door openings. If you are a diy type and can make sensible decisions, you have nothing to fear by having a go. Its amazing how these old stone walls stay up, some rock fall is normal and can be dangerous to you personally if caught unawares, I've currently have a large bruise in my lower leg. You need at least two workers and accrows again at least two. If the wall isn't well pointed and loose you will be in for an interesting few days. I'm just mortaring up an opening for a door at the moment. I open up where the lintels go first and work from both outside and in. If its an opening for french windows I (as anothe poster has already mentioned) use oak lintels either side and cast reinforced concrete in between, for door openings I just use oak lintels throughout. Once the lintels are in I take out the rest of the opening below. I find a lage angle grinder with an expensive disc a must. Its a great feeling once you have successfully done your first such job. The above description is how I do it, I'm not a builder just someone who has had a go before. Good luck. Link to comment Share on other sites More sharing options...
jondeau Posted July 10, 2008 Share Posted July 10, 2008 When I first glanced ay the original posting I thought it said your wall was 2 metres thick.........I figured you must live in a chateau.However......in the cold light of day, and sober........I'll agree with bigears. It is generally accepted that the area of wall at risk during this process is a triangular shape above the hole you are making, so if you want a one metre wide opening a one metre triangular area above the space is at risk.The normal procedure is knock a hole through the wall centrally above the area you want to remove, slide a suitable piece of steel/wood through this hole and then place an acrow prop under it at each side of the wall in order to support the masonary above your opening.If the opening you want is wider that one metre you may want to add two or more such sets of props it.Also, bear in mind, that old stone walls may not strictly conform to the triangle rule......if in doubt whack in more supports. Don't forget to allow for the lintels and a bit of elbow room when you put the supports in. Link to comment Share on other sites More sharing options...
oldgit72 Posted July 21, 2008 Author Share Posted July 21, 2008 Thanks for the replies. after tackling the roof for the past week or so, I think I'll get a builder in for the hole in the wall. Any ideas on costs for a 2 meter hole - I can supply supporting beams. Link to comment Share on other sites More sharing options...
Pierre ZFP Posted July 22, 2008 Share Posted July 22, 2008 If you want to avoid daylight robbery....don't call in 'The hole in the wall gang' [Www] Link to comment Share on other sites More sharing options...
oldgit72 Posted July 22, 2008 Author Share Posted July 22, 2008 [quote user="Pierre ZFP"]If you want to avoid daylight robbery....don't call in 'The hole in the wall gang' [Www] [/quote] Knockabout laughter me thinks. Link to comment Share on other sites More sharing options...
Gyn_Paul Posted July 22, 2008 Share Posted July 22, 2008 To put in a 2m60 lintel (oak ext, poured concrete inside), with oak side pieces for a porte fenetre with a window each side (oak, window, oak, door, oak, window, oak) took one man (plus a bit of stone lugging and clearing from me) a week from first hammer blow to cleaning the pointing off the oak. That included planing, rebating, and making all the mortice and tenon joints in the wood) So that's about 44 man-hours: about 1500 Euros.paul Link to comment Share on other sites More sharing options...
oldgit72 Posted July 23, 2008 Author Share Posted July 23, 2008 [quote user="Gyn_Paul"]To put in a 2m60 lintel (oak ext, poured concrete inside), with oak side pieces for a porte fenetre with a window each side (oak, window, oak, door, oak, window, oak) took one man (plus a bit of stone lugging and clearing from me) a week from first hammer blow to cleaning the pointing off the oak. That included planing, rebating, and making all the mortice and tenon joints in the wood) So that's about 44 man-hours: about 1500 Euros. paul[/quote]I assume the 1500 euro includes some material costs? It seems a bit steep to me if it is labour only costs for 44 hours work or am I being unrealistic?. Link to comment Share on other sites More sharing options...
Gyn_Paul Posted July 23, 2008 Share Posted July 23, 2008 Sorry that was a slip of the fingers should have been 1400 E : 44 x 32/hr Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.