JohnRoss Posted February 18, 2009 Share Posted February 18, 2009 Is there anything in the French electrical regs about running coaxial cable for the TV in wall spaces? Does it need to be in gaine. I well understand that might stop it being nibbled but do the regs require it?.........................JR Link to comment Share on other sites More sharing options...
Chancer Posted February 18, 2009 Share Posted February 18, 2009 Duplicate deleted Link to comment Share on other sites More sharing options...
Chancer Posted February 18, 2009 Share Posted February 18, 2009 YesBut unless you have to pass a consuel inspection why are you looking for complications?Also if Consuel does apply to you remember that you cannot cable direct from the antenne or parabole to the TV point, it has to go via a repartiteur in the GTL. Link to comment Share on other sites More sharing options...
JohnRoss Posted February 18, 2009 Author Share Posted February 18, 2009 Thanks for the prompt response but could you elaborate. What is a repartiteur and what is GTL. I know nothing!.......JRPS Research shows GTL to be some sort of switch/fuse box but why would you want to route a coax cable there? Link to comment Share on other sites More sharing options...
AnOther Posted February 18, 2009 Share Posted February 18, 2009 Yeah, wot he said [:-))][8-)] Link to comment Share on other sites More sharing options...
Anton Redman Posted February 18, 2009 Share Posted February 18, 2009 GTL = Gaine Technique de Logement - broady an entry conduite for power telecom and all aspects of TV essential for new instalations since 1996. Link to comment Share on other sites More sharing options...
JohnRoss Posted February 18, 2009 Author Share Posted February 18, 2009 Ok and thanks but I still don't understand why you would want to run a feed from say a TV aerial via some sort of switch/fuse box and then to a TV wall socket. Does the coax have to be interrupted in the GTL and for what purpose? Is this applying to telephone circuits as well and what about existing installations where there is no GTL. Does the GTL fulfill the role of a consumer unit as well? I take it that coax has to be in gaine then?....................JRPS A répartiteur is described thus on the web:Un répartiteur d'antenne est un accessoire de distribution normalisé central qui répartit le signal analogique ou numérique( TNT ) terrestre ( VHF-UHF)Radio et TV, en direction de plusieurs prises, selon la technique de distribution dite en étoile. Ne pas confondre avec un dérivateur d'antenne qui lui est basé sur la technique dite en épine dorsale, se caractérisant par un boîtier de dérivation aux étages. and would seem to be a box for distributing TV signals to more than one socket but what if there is only one socket? Link to comment Share on other sites More sharing options...
Théière Posted February 18, 2009 Share Posted February 18, 2009 Brico depot catalogue, page 164 "Tableaux Diverse"Tableaux de communication.Page 184 "Connectiques"Repartiteur TV. Link to comment Share on other sites More sharing options...
Chancer Posted February 19, 2009 Share Posted February 19, 2009 John RossYou do not need to be concerned by this unless you need a Consuel inspection for a new mains connection or reinstatement of one following a major renovation. If you do need consuel I strongly recommend that you buy a good and up to date book like L'installation electrique.GTL as translated, it is a seperate low voltage riser usually adjacent to the main tableau, all the low voltage services be they telephone cable, coax or computer cable have to be connected and distrubuted from there for termination, test, faultfinding and isolation purposes.An example the incoming telephone cable must go directly there (in gaine) the master telephone socket must reside there and all the cables to other phone points lead off from the connection. For testing you plug a phone into the master socket which disconnects all of the other circuits. Link to comment Share on other sites More sharing options...
AnOther Posted February 19, 2009 Share Posted February 19, 2009 So if your satellite dish is at one end of the house and your other services come in the other you have to run the coax back and forth ? Link to comment Share on other sites More sharing options...
JohnRoss Posted February 19, 2009 Author Share Posted February 19, 2009 Ok and thanks for the definitive answer. Sounds more like the sort of thing you would expect to find in a block of flats and not a single house but I suppose the way TV, Computers and Telling Bones are going you might need it at some future date. Very forward looking of them! Cheers......................................JohnRossPS Yes ErnieY I hate to think what the possible signal loss would be! Link to comment Share on other sites More sharing options...
Chancer Posted February 19, 2009 Share Posted February 19, 2009 That is precisely the case in my flat Ernie.The parabole is directly behind the TV set but the gained co-ax runs to the repartiteur in the coffre de communication de courant faible at the other end of the building and back again. Mind you with only 37m2 the cable runs are not long.It even failed the Consuel inspection because I had not earthed the Din Rail, I corrected it while he was there by making a link wire to the main tableau rather negating the effects of separating low and high voltages (low and ultra low to be precise).Thats what the regs are, it really doesnt add much cost or time to the original installation but can save an awfull lot in the future.P.S. I no longer use the satellite system I have Free.fr which is wireless. Link to comment Share on other sites More sharing options...
Théière Posted February 19, 2009 Share Posted February 19, 2009 [quote user="J.Rs gone native"]John RossGTL as translated, it is a seperate low voltage riser usually adjacent to the main tableau, all the low voltage services be they telephone cable, coax or computer cable have to be connected and distrubuted from there for termination, test, faultfinding and isolation purposes.An example the incoming telephone cable must go directly there (in gaine) the master telephone socket must reside there and all the cables to other phone points lead off from the connection. For testing you plug a phone into the master socket which disconnects all of the other circuits.[/quote]What a good idea, bring your aerial leads in close proximity to power leads, thus ensuring the worst possible signal. Who write these regs? Link to comment Share on other sites More sharing options...
Pierre ZFP Posted February 19, 2009 Share Posted February 19, 2009 and unnecessary extra joints just to attenuate the signal even further. Marvellous!!! Link to comment Share on other sites More sharing options...
AnOther Posted February 19, 2009 Share Posted February 19, 2009 So you plumb in a booster amps or 2, not cheap at satellite tv frequencies, but as an added bonus you will have yet another power supply consuming electricity and contributing to global warming (allegedly [;-)]) Link to comment Share on other sites More sharing options...
Théière Posted February 19, 2009 Share Posted February 19, 2009 3 very good reasons why I will not be adhering to the regs (again) [Www] Link to comment Share on other sites More sharing options...
AnOther Posted February 19, 2009 Share Posted February 19, 2009 Or install your satellite dish after the installation has been signed off [;-)] Link to comment Share on other sites More sharing options...
Chancer Posted February 19, 2009 Share Posted February 19, 2009 TeapotNo-one is suggesting that you should adhere to any regs, vous etes chez vous, vous faites comme vous voulez.But if you have to pass Consuel you must abide by the regs, no point getting steamed up about it. Link to comment Share on other sites More sharing options...
Théière Posted February 19, 2009 Share Posted February 19, 2009 By the time I have to pass consuel they would have changed their minds several times [:D]Its interesting that the reason cable is run in gaine apart from making it easier to cable is the gaine self extinguishes.That is because the cable is sleeved in PVC as it is in the uk, PVC not only smokes, produces nasty toxic fumes but burns well.If the cables were sleeved in polypropylene none of this would happen as it self extinguishes. That is why military spec cable uses PP.Just because PVC got there first.No steaming up here [:D] Link to comment Share on other sites More sharing options...
Chancer Posted February 19, 2009 Share Posted February 19, 2009 TeapotYou must work as fast as me!My consuel certificate has now expired before I am ready for the EDF connection (it is hotwired at the moment) so I will need another inspection and have to either upgrade or remove things according to any new requirements. Link to comment Share on other sites More sharing options...
Théière Posted February 19, 2009 Share Posted February 19, 2009 [quote user="J.Rs gone native"]TeapotYou must work as fast as me!My consuel certificate has now expired before I am ready for the EDF connection (it is hotwired at the moment) so I will need another inspection and have to either upgrade or remove things according to any new requirements.[/quote]I am a tantric builder, I can make a ten minute job last all day.[:D] Link to comment Share on other sites More sharing options...
mark and sue Posted February 20, 2009 Share Posted February 20, 2009 hi how would i know if i needed a consuel certificate ?? Link to comment Share on other sites More sharing options...
Jonzjob Posted February 20, 2009 Share Posted February 20, 2009 [quote user="Anton Redman"]GTL = Gaine Technique de Logement - broady an entry conduite for power telecom and all aspects of TV essential for new instalations since 1996.[/quote]t does't in our house Anton. Built in 1982 and as far as I have seen in the 4 years we have been here the phone line comes into a sunken box in the wall of the garage and then goes out to several phone sockets of which only 2 work, but we don't need them anyway. The coax comes via an amp then straight to the TV and the new dish does the same with it's double coax. We are definately not looking to rewire the place though. Maybe change the consumer unit and get rid of the fuses someday. We may even find out what the different fuses are for too because only about 1/3 of them are labled.The house was built by a French builder for his son and we have been told that it is done to a very good standard but I wonder sometimes about the electrics? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.