Marym2 Posted January 16, 2010 Share Posted January 16, 2010 Has any one used this paint? Thermilate, been looking this up, nano tech etc, but have not used it before and wonder does this work/as good as its say 'on the can' Thanks Link to comment Share on other sites More sharing options...
NickP Posted January 16, 2010 Share Posted January 16, 2010 I hope you don't think I'm being flippant, but anti condensation paint sounds like an oxymoron to me. I Googled it and the answers in the advertising blurbs just don't add up. Having said that I am sure that some boffin will come up with an answer too prove that it is what we've all been waiting for. The reason I can't get my head around it is the fact that paint is micro millimetres thick and I can't see where the insulating property comes from. Like Marym2 I would be intrigued to hear from somebody who can convince me that it works, if so I would quite happily hold up my hands and say "great".Confused of St Jacques Des Guerets Link to comment Share on other sites More sharing options...
Théière Posted January 16, 2010 Share Posted January 16, 2010 I have used a nano technology anti mould paint based on a silver formula which as far as not being contacted since I imagine is still working but that is really something different albeit from the same stable.They are not the only people marketing it though so must be some truth behind ithttp://www.nwepaints.co.uk/acatalog/Anti_Condensation___Anti_Mould_Paint.html Link to comment Share on other sites More sharing options...
Dog Posted January 16, 2010 Share Posted January 16, 2010 Crumbs must be expensive - silver will certainly inhibit moulds growing but for how long? Link to comment Share on other sites More sharing options...
Théière Posted January 16, 2010 Share Posted January 16, 2010 You not wrong Dog, £100 for 2.5 litres I seem to remember. Used in operating theatres, vets, clean rooms etc Link to comment Share on other sites More sharing options...
Dog Posted January 16, 2010 Share Posted January 16, 2010 It'd be cheaper to get some silver filings and mix them in some epoxy paint. Or alternatively spray the dodgy walls with a 5% bleach water solution every month before the mould gets a chance to grow. A stronger bleach solution will get rid of unsightly mould stains. Link to comment Share on other sites More sharing options...
Théière Posted January 17, 2010 Share Posted January 17, 2010 You can't expect our health service to employ people to wash down the walls with dilute bleach can you?Heavens above, you'll expect them to kill MRSA next [;-)] Link to comment Share on other sites More sharing options...
Chancer Posted January 17, 2010 Share Posted January 17, 2010 MaryM2What do you want to use the paint for?To prevent condensation from forming?Or to stop it from running and dripping?If its the former then a layer of a few mms of paint is not going to be sufficient insulation, there are paints sold claiming this but their real usage is to seperate fools from their hard-earned.If it is the second there are expensive paints available but I found a much cheaper solution.Another question, does the finish need to be decorative? i.e will it be visible? Link to comment Share on other sites More sharing options...
NickP Posted January 17, 2010 Share Posted January 17, 2010 Chancer wrote: " but I found a much cheaper solution."Chancer the suspence is killing, so are you going to let us know? Link to comment Share on other sites More sharing options...
Chancer Posted January 17, 2010 Share Posted January 17, 2010 Its only cheaper if you really have need of a solution and I did.Tell me your problem and I might condescend to put you out of your misery [;-)] Link to comment Share on other sites More sharing options...
Marym2 Posted January 18, 2010 Author Share Posted January 18, 2010 HiJust wondered about this as someone asked as he was thinking of using it on some interior walls that get cold and then has condensation forming On another reply Anti mould paint etc has never worked when he has used it. This stuf has tiny 'vacums' but again would like to know if any one has used it, this company/brand in particular. Link to comment Share on other sites More sharing options...
Marym2 Posted January 18, 2010 Author Share Posted January 18, 2010 I have spent all morning looking at this and so far it does not convince me, so unless anyone has a good word about this product, I will leave it there.Thanks for your replies. Link to comment Share on other sites More sharing options...
pachapapa Posted January 18, 2010 Share Posted January 18, 2010 Condensation depends largely on the surface of the object, a mirror will have condensation before a matte surface.In the Atacama desert on the coast sheets of shiny black plastic are hung in order to harvest the dew from the sea mist ( camanchaca) during the night.http://fr.sports.yahoo.com/video/30122009/70/connaissez-vous-le-camanchaca.html Link to comment Share on other sites More sharing options...
BIG MAC Posted January 19, 2010 Share Posted January 19, 2010 Evey property has condensation as long as there is ambient moisture inc breathing there will be condensation at some point.The issue is where it reaches unaccptable levels due (Or even dew) to temperature differentials.Will paint significantly affect the range of surface temperature required for the formation of condensate to the extent that it wont occur?Surely easier to do what people have done for years, heat moderately and ventilate well.There are air handling systems which will extract condensate and return the already warm air to the living compartments (bit like the AC in your car)I think they are called AAVs in France but may have to stand corrected on that?I believe for our market a photo voltaic AAV on battery pack which charges for 5 hrs then runs for 30 mins may be a good system to have when a house is sitting empty for long periods.......any inventors out there? and I claim my 5% international royalties now!Probably wouldn't work! Link to comment Share on other sites More sharing options...
Marym2 Posted January 20, 2010 Author Share Posted January 20, 2010 I have now seen this stuff,http://www.enviro-materials.co.uk/products.asp?c=341 and as I have lots of papering skills this looked the part. Then I saw the price, so now i am trying to find a cheaper supplier, has anyone tried this? Link to comment Share on other sites More sharing options...
Chancer Posted January 20, 2010 Share Posted January 20, 2010 I had a problem whilst building/converting the apartment that I now live in, the roof over the living and sleeping areas I did with tole bac acier isolé but the roofing sheets over the kitchen and bathroom area were uninsulated, I hadnt foreseen a problem as I would have a false ceiling underneath with 20cm of laine de verre.In the summer whilst progressing the build I found masses of condensation was building up under the non insulated roofing and running down in streams, if I had left it like this it would have soaked the insulation and ceilings and rotted the wallplate and trusses.So I looked into anti-condensation paints and found that all they do is to hold or absorb a certain quantity of water (and hence prevent running and dripping) before it evaporated away, the area had to be well ventilated to do so.When I saw the price for what was basically a textured paint I nearly fell over and decided to find my own solution by experimentation. What worked best was bituminous car underbodt paint (schutz) applied in a textured finish with a pneumatic schutz gun, it held a huge amount of condensate without it running. It also only cost me £2 per litreMy roof is now coated underneath with it, it has air entry vents and two VMC extraction points and touch wood everything is still dry as a bone there. Link to comment Share on other sites More sharing options...
Salty Sam Posted January 20, 2010 Share Posted January 20, 2010 [quote user="pachapapa"]Condensation depends largely on the surface of the object, a mirror will have condensation before a matte surface.In the Atacama desert on the coast sheets of shiny black plastic are hung in order to harvest the dew from the sea mist ( camanchaca) during the night.[/quote]What has the Atacama Desert got to do with it ?We followed a similar path to Chancer using a bitumen paint. More recently we've insulated the metal roof of an outbuilding by fixing sheets of PU foam to the inner surface and so far, it is working fine. Link to comment Share on other sites More sharing options...
Chancer Posted January 21, 2010 Share Posted January 21, 2010 After seeing some very expensive kit for spraying foam insulation to the inside of tiled rooves one of my earlier experiments was to try and modify my pro foam gun to spray the mousse on to the underside of my virtually horizontal tole bac acier.Twas one of my more spectacular failures! Link to comment Share on other sites More sharing options...
Théière Posted January 21, 2010 Share Posted January 21, 2010 [quote user="Chancer"]After seeing some very expensive kit for spraying foam insulation to the inside of tiled rooves one of my earlier experiments was to try and modify my pro foam gun to spray the mousse on to the underside of my virtually horizontal tole bac acier.Twas one of my more spectacular failures![/quote]Got any pictures [:D][6] Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.