savoirflair Posted May 1, 2010 Share Posted May 1, 2010 We are trying to locate some terracotta wall capping tiles without success..........all we can find are proper roofing tiles which are not right for the job.What we need are smaller than normal tiles, with parallel sides, not tapered like the roof tiles. Does anyone (a) know what they are called in French (I would call them pantiles in English) and (b) know where we might locate some?We are in 34 (Herault).Thanks in advance!Amanda Link to comment Share on other sites More sharing options...
ericd Posted May 1, 2010 Share Posted May 1, 2010 I would call them "Tuiles de Rives droite or gauche" but your explanation is a bit vague (you say parallel you might want to say perpendicular)Try this link.http://www.google.fr/imgres?imgurl=http://www.n-r-e.fr/img/schema_big.jpg&imgrefurl=http://www.n-r-e.fr/lexique-de-la-couverture-zinguerie-gouttiere-pvc-zinc-pose-de-fenetres-de-toit-maison-neuve-renovation-petites-reparations-bardage-lexique-de-la-couverture-n-r-e-groffliers-pas-de-calais-62.php&usg=__D43xShgT2dglD2rk_MGANjCmn6o=&h=495&w=663&sz=76&hl=fr&start=1&um=1&itbs=1&tbnid=V205IsWAPfuXNM:&tbnh=103&tbnw=138&prev=/images%3Fq%3Dtuiles%2Bde%2Brives%26um%3D1%26hl%3Dfr%26sa%3DX%26tbs%3Disch:1orhttp://www.asturienne.fr/cote-technique/couvrir-en-tuiles-X127S5R44 Link to comment Share on other sites More sharing options...
savoirflair Posted May 1, 2010 Author Share Posted May 1, 2010 Thanks for your reply Eric. I have googled tuiles de rives and they are not what I am thinking about.To try to describe them better - it's a bit like if a terracotta pipe was split vertically - so you have a tile that is equal in width all the way down, and curved in the middle. You put them on top of plain walls as a finishing decoration.Amanda Link to comment Share on other sites More sharing options...
Boiling a frog Posted May 1, 2010 Share Posted May 1, 2010 As far as I am aware the French just cut normal canal tiles to use on the top of walls.http://www.monier.fr/les-produits/product/product/canal-40.html Link to comment Share on other sites More sharing options...
ericd Posted May 1, 2010 Share Posted May 1, 2010 If it's a cylinder cut in half lenghtways these are called "tuile canal". The older type tuile canal are said to have been made on nun's thighs hence their form wider at the top and narower towards the knee..... Link to comment Share on other sites More sharing options...
ericd Posted May 1, 2010 Share Posted May 1, 2010 Here is a link to a photograph of our house showing the nunery made "tuiles canal"http://i301.photobucket.com/albums/nn49/frenchgold/DSC05931.jpg Link to comment Share on other sites More sharing options...
Anton Redman II Posted May 1, 2010 Share Posted May 1, 2010 Suggest having a search on faitage which is the roof ridge.http://www.toiturelegere.fr/faitieres-faitieres-rondes-xsl-250_259_270.html Link to comment Share on other sites More sharing options...
ericd Posted May 1, 2010 Share Posted May 1, 2010 Tuile faitiere are ridge tiles. What theiere is after are tuiles canal. Link to comment Share on other sites More sharing options...
Anton Redman II Posted May 1, 2010 Share Posted May 1, 2010 http://www.imerys-toiture.com/famille-de-tuile/canal/tuile-canal.aspRespectfully suggest you read through the description in the link above. You can ridge in canal tiles but ridge tiles with parallel sides, which was what was requested are available. I am sure somebody can make a better pass at the French than me.C’est la tuile Canal qui est la plus ancienne des tuiles. Inventée par les romains, elle se compose d’une tuile de courant (dessous) et d’une tuile de couvert (dessus), chacun des éléments étant de forme conique. Ces tuiles se bloquent elles-mêmes par glissementThe Canal tile is the oldest form of tile.Invented by the Romans, they are composed of running/ under tiles and covering/top tiles each of these is in a conical (not semi circular form). The tiles block each other against slipping. Link to comment Share on other sites More sharing options...
ericd Posted May 1, 2010 Share Posted May 1, 2010 Read my bit about Nun's thighs.... :-) xx Link to comment Share on other sites More sharing options...
pachapapa Posted May 1, 2010 Share Posted May 1, 2010 [quote user="savoirflair"]Thanks for your reply Eric. I have googled tuiles de rives and they are not what I am thinking about.To try to describe them better - it's a bit like if a terracotta pipe was split vertically - so you have a tile that is equal in width all the way down, and curved in the middle. You put them on top of plain walls as a finishing decoration.Amanda[/quote]Pantiles have an S section and bear no resemblance to "split pipes" the only similarity is that the longitudinal limits are parallel.[IMG]http://www.salvo.co.uk/images/userimgs/29078/10-000-reclaimed-pantiles_45318_1.jpg[/IMG] Link to comment Share on other sites More sharing options...
Anton Redman II Posted May 1, 2010 Share Posted May 1, 2010 Those interlock and form a water proof layer with only on tile Link to comment Share on other sites More sharing options...
Jonzjob Posted May 1, 2010 Share Posted May 1, 2010 If I am correct in thinking what you are loking for then we bought some form Point P in Carcassonne. Looking at the end of them they look like a very flat 'D' going to a flat point at the round of the 'D', if that makes sense. I got them to cut in 1/2 length wise to do a finish to a step on the terrace for our pool.I have had a look at the Point P web site, but I couldn't find them there, but they definately have them in thier yard. They are about 18 inches long by 9 or 10 inches wide and hollow terre cuite.They look nothing like the tulle for roofing and are definately for the topping on walling. Link to comment Share on other sites More sharing options...
pachapapa Posted May 1, 2010 Share Posted May 1, 2010 Tuile couvre-mur canal à bords parralèles.Couvre-mur du Périgord.Couvre-mur RomanPossibly you used Couvre-mur Roman, particularly adaptable to non straight walls as in curvy walls; see image below[IMG]http://www.tuilerielambert.fr/images/orki/image_191.jpg[/IMG][IMG]http://www.tuilerielambert.fr/images/orki/image_190.jpg[/IMG] Link to comment Share on other sites More sharing options...
pachapapa Posted May 2, 2010 Share Posted May 2, 2010 However in the depths of Deux-Sèvres we just use tuiles "tige de bottes", the small end of the "courants" face down and the big ends of the "chapeaus" similarly face down; thereby retaining the parallel disposition of the centre lines of the rows. On the other hand if the muret of the wall is curved the freedom of positioning of the "tige de botte" accomodates easily such curvature. A local Deux-Sèvrien artisan produced tuile will cost around € 0.50 each. http://www.atelierdelaterrecuite.fr/ Link to comment Share on other sites More sharing options...
The Builder. Posted May 2, 2010 Share Posted May 2, 2010 Coping stone is usually referred to as chaperon or sometimes plaquettes finition.Chaperon terre-cuite in various profiles should be readily available or to order..... Link to comment Share on other sites More sharing options...
Jonzjob Posted May 2, 2010 Share Posted May 2, 2010 Here are a couple of, not too good, photos of the ones I used. They are about 5 inches, 1/2 the complete cap stone.[IMG]http://i47.photobucket.com/albums/f180/Jonzjob/Johns/Halfcapstone1.jpg[/IMG][IMG]http://i47.photobucket.com/albums/f180/Jonzjob/Johns/Halfcapstone3.jpg[/IMG] Link to comment Share on other sites More sharing options...
savoirflair Posted May 3, 2010 Author Share Posted May 3, 2010 Many thanks to everyone for their input - much appreciated. Have just found what we were looking for at Chausson - they are called 'double Genoise' apparently.Amanda Link to comment Share on other sites More sharing options...
pachapapa Posted May 3, 2010 Share Posted May 3, 2010 In Deux-Sèvres the traditional "genoise" on the facade of a building is done by skilled local maçons using traditional "tige de bottes" tuiles canales. The tuiles are placed with their courant facing down with a slight in chain sur-elevation to accomodate the lack of parallel juxtaposition. The genoise is done as a single, double or even triple range of tiles; whilst the genoise adds a distinctive touch to the facade it's purpose is in fact principally functional allowing the rain to be thrown clear of the facade and avoiding staining of the wall. Of course with a house less than 500 metres from a listed monument and the Architect de Batiments de France would not take kindly to mass produced industrial corniches in terre cuite.Glad to have been of help. Good luck with your "new build" on a lotissement.[:)] Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.