stan Posted June 25, 2011 Share Posted June 25, 2011 Try as I may, I cannot find a waste outlet for an acrylic free stnding roll top bath. The thickness of the walls of the bath are 14mm, whilst the base is almost 3cm. Nothing that I have found in Mr Bricolage and Bricoman seems to fit the waste hole in the base. Any ideas? Link to comment Share on other sites More sharing options...
Anton Redman II Posted June 26, 2011 Share Posted June 26, 2011 Where did you buy the bath ?What diameter is hole ? Link to comment Share on other sites More sharing options...
Théière Posted June 26, 2011 Share Posted June 26, 2011 Is it the length or dia which is the issue, your post didn't make that clear [:)] Link to comment Share on other sites More sharing options...
sid Posted June 27, 2011 Share Posted June 27, 2011 Gone for an early bath? [blink] Link to comment Share on other sites More sharing options...
Théière Posted June 28, 2011 Share Posted June 28, 2011 No disapeared down the missing plug hole [:D] Link to comment Share on other sites More sharing options...
mint Posted June 28, 2011 Share Posted June 28, 2011 [quote user="Théière"]No disapeared down the missing plug hole [:D][/quote]Er.....and clean round the bend?(sorry, heat has addled my brains) Link to comment Share on other sites More sharing options...
stan Posted June 29, 2011 Author Share Posted June 29, 2011 Thanks for all the input!Luckily enough, I had the presence of mind to remove the old brass fittings and put them in a safe place which I totally forgot about, so problem solved. Old ones cleaned and replaced. So, yes, going slowly round the bend!!...and the heat did not help either! Link to comment Share on other sites More sharing options...
stan Posted June 29, 2011 Author Share Posted June 29, 2011 [quote user="Théière"]Is it the length or dia which is the issue, your post didn't make that clear [:)][/quote]The thickness of the walls of the bath are 14mm, whilst the base is almost 3cm. Sounded clear enough to everyone else! Link to comment Share on other sites More sharing options...
Théière Posted June 29, 2011 Share Posted June 29, 2011 Yep a clear description of the bath and I have yet to come across the waste fitting that wasn't long enough, in fact they are normally too long and restrict the amount of space available for the trap.[quote user="stan"]Try as I may, I cannot find a waste outlet for an acrylic free stnding roll top bath That is long enough. The thickness of the walls of the bath are 14mm, whilst the base is almost 3cm. Nothing that I have found in Mr Bricolage and Bricoman seems to fit the waste hole in the base. Any ideas?[/quote]Now if you could only construct a descriptive sentence we would be in no doubt as to the problem [:P]And then I would have suggested you look in the safe place you forgot about [:)][:D] Link to comment Share on other sites More sharing options...
stan Posted July 1, 2011 Author Share Posted July 1, 2011 [quote user="Théière"]Yep a clear description of the bath and I have yet to come across the waste fitting that wasn't long enough, in fact they are normally too long and restrict the amount of space available for the trap.[quote user="stan"]Try as I may, I cannot find a waste outlet for an acrylic free stnding roll top bath That is long enough. The thickness of the walls of the bath are 14mm, whilst the base is almost 3cm. Nothing that I have found in Mr Bricolage and Bricoman seems to fit the waste hole in the base. Any ideas?[/quote]Now if you could only construct a descriptive sentence we would be in no doubt as to the problem [:P]And then I would have suggested you look in the safe place you forgot about [:)][:D][/quote]Glad to see it is just not me that can make a fool of myself! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.