mpok8 Posted May 27, 2013 Share Posted May 27, 2013 I need to buy 250 metres of pine skirting board in the Jura region. I would like them to be of the dimensions above (i.e. 85 lengths). They should have an ogee pattern on one side. Does anyone know what the best place to go in Jura or more generally in France in order to get this? I am guessing that a timber yard would be my best bet. What is the French for this? Generally speaking would they cut this kind of bespoke product?thansk Link to comment Share on other sites More sharing options...
HoneySuckleDreams Posted May 27, 2013 Share Posted May 27, 2013 What you are looking for is Plinthe SapinI have seen Brico Depot sell it with the Ogee profile but they are 120mm x 13mm - what you are looking for is something i've not seen sold. I did ask once for something similar and got the response "who do you think you are! Versailles?"The timber yard would cut you the lengths (make sure you find one with drying ovens), but I would be surprised if they could do the Ogee profile. However...all is not lost.. sometimes they have friendly chippies just a phone call away who would be able to route the profile for you. Edit: Lapeyre do a plinthe sapin massif, but only 110mm x 15mm Link to comment Share on other sites More sharing options...
mpok8 Posted May 27, 2013 Author Share Posted May 27, 2013 great! THanks for the reply... i will look into it and let you know what i find Link to comment Share on other sites More sharing options...
Anton Redman Posted May 27, 2013 Share Posted May 27, 2013 You may find a proper timber yard who will mill boards to those dimensions but consensus on various French forums over the years has been it is cost effective to buy a table router and bits and mill your own. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.