chateaubriant Posted August 17, 2014 Share Posted August 17, 2014 Anyone know the minimum depth to bury the armour cable ?Thanks Link to comment Share on other sites More sharing options...
Théière Posted August 17, 2014 Share Posted August 17, 2014 It was a while ago I did this work, 500-600mm, covered in sand for min of 100mm or was it 200? then the grillage rouge. and then soil.Of course if you are EDF you can do what you want and 300mm is enough [6] Link to comment Share on other sites More sharing options...
Chancer Posted August 18, 2014 Share Posted August 18, 2014 And I dont think the French normes accept or even acknowledge the existence of armoured cable, even if you have already bought it I suggest you run it in the correct gaine in case in the future it is picked up on and becomes a problem. Link to comment Share on other sites More sharing options...
Théière Posted August 18, 2014 Share Posted August 18, 2014 That's a very good point Chancer, The cable spec for the French Normes is I believe U1000/R2V which is non armoured but should be run in a red gaine conduit. I was surprised that armoured cable was missing from France but there you go. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.