PaulT Posted September 8, 2013 Share Posted September 8, 2013 Renovation of the bathroom which is now combined with the WC. The floor of the bathroom was all over the place, sloping this way and that so a lot of remedial work.Plus the other problem - the only bathroom and WC so need to keep it in use.So decided that for the floor I would use the quick setting tile adhesive. Went well until I ran out. Went to another DIY place for some more, more expensive but thought let's go with it so as to get on with the work.Knocked up the new lot and it was very runny, even reducing the water they said to add. Then tried tiling - you could not trowel it, it just returned to a liquid. The process required a great deal of usage of Anglo Saxon and the word RUBBISH being expressed a number of times.I then checked the bag - and it is self levelling compound. Well, I got three tiles down before checking just hoping they are OK.So if you like making things hard for yourself then I recommend using floor levelling compound for tiling. Link to comment Share on other sites More sharing options...
Val_2 Posted September 8, 2013 Share Posted September 8, 2013 Well the idea of self levelling compound is to let it dry first before you put tiles down.We always used slc on jobs first where the level was suspect and the end results were always first class. Tiling like any job comes with years of practice and doing it correctly from the outset i.e. starting in the centre of the floor and not the edge and using spacers which should not be removed for at least 24hrsmin Link to comment Share on other sites More sharing options...
PaulT Posted September 8, 2013 Author Share Posted September 8, 2013 Yes Val, I know that slc should go down before tiles - that is if you realise you have bought slc.It was not my intention of using slc, I dug up parts partially to run pipes and partially to correct the unevenness. And yes, I have started from the centre of the room and the floor is a great deal better than the 'professional who laid the previous tiles. Link to comment Share on other sites More sharing options...
Mr Ceour de Lion II Posted September 8, 2013 Share Posted September 8, 2013 I've always struggled tiling. Do not enjoy it in the slightest. That and plastering. Can't do that either. Link to comment Share on other sites More sharing options...
EuroTrash Posted September 8, 2013 Share Posted September 8, 2013 I like putting tiles on because you seem to cover a large area fast and it looks great, but I hate trying to cut them, I never get it right first time and I waste so many. Link to comment Share on other sites More sharing options...
monsieur macon Posted October 26, 2013 Share Posted October 26, 2013 "Ragréage" they call it, self leveling compound.....laying this product and then tiling are not amateur skills, ive been building in france for 10 yrs and still do tiling with a trusted professional tiler....its not a job you can improvise and if you botch it, it looks terrible. Self leveling compound usually can level up to 20mm, sometimes 30mm with two coats. The support should be clean and slightly damp so that the compound does not crack when you pour it. You must let the product dry completely before tiling... Link to comment Share on other sites More sharing options...
YCCMB Posted October 26, 2013 Share Posted October 26, 2013 Funny how the experts don't seem to have read the OP before jumping in. I just hope they read instructions more carefully when they're doing one of their expert jobs..... Link to comment Share on other sites More sharing options...
dave21478 Posted October 26, 2013 Share Posted October 26, 2013 I am really good at tiling - its just....obvious...I seem to have a knack for it. Another wasted career opportunity, I suspect.My one tip - think carefully about the layout before you start, especially if doing a whole room, or at least a few walls. I see many tiling jobs where the laying is fine, but they have had to use small slices or a really thick grout bead to make up gaps at corners etc that could have just been planned better. Link to comment Share on other sites More sharing options...
Chancer Posted October 26, 2013 Share Posted October 26, 2013 Funnily enough I am floor tiling again tomorrow, the first time in 6 years, I spent this evening doing exactly what Dave suggested, well worth it in the long run.This time I am doing a proper matwell, last time i just finished the tiles against a temporary batten, its held up but one day the edges will get broken, tomorrow job is the communal stairwell so it has to be as strong as can be.Yeah I like tiling too [;-)] Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now