Jump to content

Yachty

Members
  • Posts

    24
  • Joined

  • Last visited

    Never

Everything posted by Yachty

  1. What products/consumables do you find difficult to obtain here in france and which items do you regularly purchase from outside France/bring from UK to save money? With Sterling in "free fall" the cost of shipping is easily outweighed by savings and convenience of home deliveries. We regularly purchase everything from food stuffs and clothes to building materials and car parts.
  2. Hep2o actually do a 16mm range of pipe and fittings, available as a special order as very few merchants will stock, and cheaper in UK than in France.  A push fit socket reducer 16 to 15mm exists also.
  3. Ahhh! I get you. Presumably wound up with plenty of ptf tape and the coupling should be pretty failsafe? Thanks to you all gentlemen. Now, how to get my wife back into the kitchen?
  4. When you suggest two pairs of 15mm and 14mm compression fittings, I assume that one set would have to be female or tap connectors to be compatible for a join betwixt the two, if I understand you correctly? You flatter me in using the term plumber! Or perhaps your intention is otherwise!!! Indeed I do have a quantity of UK fittings, main pex variety. Also, from a DIY perspective it is easier to cope with the familiar. As you suggest the local pipe is not so readily bent and the variety of alternatives not as abundant as in Blighty. In aiming to use familiar fittings, the job could be done within a day, entirely replumbing house. However, alternative is funding anothers lifestyle and Mr Sarkozy et al.
  5. let me know if I can pick them up here in UK. Will arrive Barcelona and drive to Carcassonne Thursday.
  6. What about plastic piping? Assuming this exists per UK, would it be in say 14mm and interfaced with either straight compression coupling or pushfit equivelent? Nearing end of my interrogation!
  7. I think I understand  what is being said, eBay my Hep2O! Okay then, assuming I continue with the existing 14mm and run the supply throughout in said diametre, presumably there is a French 14mm pushfit plastic pipe system? I understand French copper is less malleable, therefore not so readily bent. Do Yorkshire type pre soldiered joints exist. Again Thanks! 
  8. Thanks for your comments. I am not rty to re-invent the wheel in plumbing terms however, I have considerable stocks of the aforementioned brand and a requirement to replumb house entirely. That said the house is small and on the wet side will only require one kitchen and one shower room/loo. My train of thought was as follows.......... Fit pressure reducer after internal meter and then go to 15mm Hep throughout. Obviously the first length out of the hot water cylinder will be in copper but thereafter continue in 15mm. In previous forums it has been suggested that compression fitting do indeed exist to adapt between UK and French. My main issue would be going from 14mm incoming. Again other parties have suggested UK compression, "wound up" would suffice. Thanks.  
  9. If say using Hep2O 15mm or 22mm plastic piping, do compression fittings exist locally to reduce or otherwise to French ridgid pipe diameters, if so what is the correct terminology for such? Thankyou gentlemen.
  10. http://net.grundfos.com/doc/webnet/sololift/int/ The WC3 model is the one you need. I fitted the CWC3 model for BTW pan yesterday. Simple pretty quiet and easy to maintain.    
  11. Gentlemen, My thanks for your assistance. 
  12. Hi, saw your posting re roof repairs etc and the link to the water proof substrate to take canal tiles. Can you recommend any sources for self education witha view to managing and completing my own re roofing project?  am in Aude   Regards, sebastian
  13. Hi how was your re roofing experience per your historic post. Am interested in re roof options and mechanics therein in order that I may complete roof repairs myself. any assistance received gratefully.
  14. I have an old village house with solid rubble filled stone walls, inheritantly damp with a constant leaching of salts and plaster/paint residues. I would be interested also to determine best way to treat walls, strip render, re-render, leave stone exposed etc? I am against cladding them as this will enevitably not improve matters. Maybe there is a specialist plaster/render that is more breathable?   
  15. My mother died in testate last year leaving me a semi derelict house in Aude. It transpires now that there are sums outstanding in respect of personal banking, though the bank was visited last June and they confirmed that the small mortgage was covered by insurance, despite enquiries they failed to disclose any other outstanding indebtedness. Also, electricity, taxes Fonciere and D'habitacion and a substantial amount in respect of water.  To my knowledge the house has not been lived in since purchased years ago. Firstly, I should need to quantify how the figures oustanding have been determined, thereafter might it be possible to have them written off, reduced and or penalties/interest waived? My notaire whilst not speaking English has failed to follow my requests regarding the aforementioned and I would be interested if any members have similar experience. Regards,
  16. Hi, Have amended my current way of thinking also. As our cold weather use of the dwelling is as yet undecided, today's plan is to install a wood burner in the kitchen/sitting room and electric U/F heating also. Another wood burner in the upper floor lounge with thermostatically controlled oil filled rads in each of the bedrooms and bathrooms. This approach is the least expensive in terms of capital outlay and allows us the utmost of flexibility to review in the future. Can anyone advise the best source of info regarding warm air heating derived from the wood burners flu? Also, what might the costs be  for a 150ltr chauffe eau and perhaps the most competitive source of purchase? Thanks.    
  17. Hep2o tech specs are available on their web site. However, product test result tables show pipe and fittings rated to 12 Bar and guaranteed for 50yrs. (depending on aplications). The product suits my applications perfectly,  as well within my domestic water pressure. Hepworths export this product range to 40 countries.
  18. Did you install such a system and if so, do you have the specs/drawings available. I have inherited a pile of rubble without any heating and this approach seems like a feasible option. Thanks.
  19. Portable blast pots on eBay UK from £60.
  20. Bring all HEP and just change from supply onwards. fraction of the cost, fittings in UK 50p each, roll of pipe£50 time saved , priceless! There many other considerations but I will have two pallets of materials and tools, delivered to my door in 11 from Yorks for a days wages.   
  21. Check this link, http://www.veitchi.com/linotol/linostone.html Basically, repair with cement mortar mix or resin mortar and apply as directed. as easy as emulsioning a wall. Probably a bit late for you now though!    
  22. Check this link, about the most competative available in UK and lowest profile, http://www.aht-heating.com/est Am using it here in UK and considering it for my House in 11. Bon Chance! 
  23. Hello Peter, Just perusing the forums and came across your historic comments regarding woodfired CH systems. I have inherited a rather valueless but charming village house nr Carcassonne and intend to renovate it , as cost effectively as poss! Am considering installing some form of heating and hitherto had intended to use electric under floor mats to ground floor and a wood burner to our upper floor sitting room.  However, to increase the efficiency, it makes sense to consider installation of back boiler to service rads to other areas.  Frankly the house will not see much winter use but heating would be desired at some point. Cost of installation is the main consideration. If you feel inclined to advise, I would welcome some dialogue. Regards,   sebastian      
×
×
  • Create New...